Differences between revisions 17 and 18
⇤ ← Revision 17 as of 2020-01-23 23:30:44 →
Size: 1667
Editor: scot
Comment:
← Revision 18 as of 2021-08-26 15:17:58 → ⇥
Size: 1665
Editor: scot
Comment:
Deletions are marked like this. Additions are marked like this.
Line 10: Line 10:

Virtual Network Configuration

NOTE: THERE HAS BEEN A CHANGE THE PROCEDURE BELOW! YOU NO LONGER NEED TO SETUP THE WHOLE SYSTEM SEE THE NEW DIRECTIONS

Below is a diagram that shows how your virtual network sees the world and how the world sees it. We have eliminated for the moment the complications of the $$\mu$$Cloud. The IP address 216.249.119.123 is a place holder for your IP address.

Network Diagram.png

New Instructions

First it is possible for you to use the old instructions, but the following procedure will make it easier.

  1. Download the new scripts: nat, interface, list

  2. Using FileZilla or your favorite scp client and login to your server (use the Host=IP address, username=[name given in class] and port=22).

  3. Upload the "nat" file you downloaded. (A real linux person would use wget or some such utility to get it directly from this site to your linux machine if you want try that instead ;-)

  4. On your linux machine issue the command:  chmod u+x nat 

  5. Now run it ./nat -a [your ip address]

Your system is now setup! You can double check this by running  ./list  which shows the configuration changes that we just made. Of course you can always just look at the script to see what it did ;-}

Troubleshooting

So you may have noticed that there is already a nat script on your server. Well it does an extra thing that will cause trouble. If you ran that script you need to edit /etc/network/interfaces and remove the duplicate eth1 information.

WindowsAdministration/VirtualNetworkConfiguration (last edited 2024-09-05 17:39:16 by scot)